Generators For Manufacturing Facilities
We supply, install, repair and maintain generators for manufacturing sites across the UK, covering everything from generator supply and installation to testing, repair and ongoing maintenance. Contact us today!
- Emergency Power Supply
- Full-Service Installation And Maintenance
- Reliable, High-Quality Generators
Generators For Manufacturing Facilities
GCM supplies diesel generators for manufacturing sites where reliable power is required for production machinery, process equipment, control systems and other essential electrical loads.
We supply generator sets across a wide range of power outputs manufacturing facilities. We can help assess the site’s requirements and identify a suitable generator for the intended application.
When specifying a generator for a manufacturing facility, we can assess:
- The electrical load that needs to be supported
- Critical machinery and production systems
- The site’s existing electrical infrastructure
- Standby and operating requirements
- Generator location and site access
- Transfer and control arrangements
- Future changes to the site’s power requirements
GCM can handle from initial requirements and generator selection through to generator supply and installation, providing a system suited to the manufacturing site’s electrical requirements. Contact us today!
When the power fails, we won't!
Generator Installation for Manufacturing Facilities
GCM provides generator installation for manufacturing facilities, with the installation planned around the site’s electrical infrastructure, operating requirements and the equipment the generator needs to support.
Our engineers assess the site and handle the key installation requirements, including generator positioning, electrical connections, transfer arrangements, control systems, fuel requirements and commissioning. We make sure the generator is correctly integrated into the facility and ready for operation.
Where automatic transfer is required, we can install and configure the associated AMF/ATS controls so the generator starts and transfers the required load when the mains supply fails. We also provide generator control system services, including AMF/ATS panels, synchronising systems and control panel work.
From initial site assessment through to installation and testing, GCM can manage the generator installation as part of a complete power generation project. Contact us today.
Generator Repair for Manufacturing Sites
GCM provides generator repair for manufacturing sites experiencing faults, breakdowns or unreliable operation. Our engineers diagnose the problem, identify the cause and carry out the required repair to get the generator operating correctly again.
We repair generators for manufacturing sites and determine faults including:
- Failure to start
- Battery and charging problems
- Fuel system faults
- Electrical faults
- Control system faults
- Overheating
- Low or unstable generator output
- Mechanical faults
Our engineers assess the generator, identify the fault and carry out the necessary repair. We then test the system to confirm it is operating correctly before returning it to service.
If your manufacturing facility has a generator fault, contact GCM for generator repair.
Generator Servicing and Maintenance for Manufacturing Sites
Regular generator servicing helps manufacturing sites keep standby power equipment maintained, tested and ready to operate when required. GCM provides planned generator maintenance for facilities where reliable backup power is important to production equipment, machinery and essential site systems.
Our engineers can inspect the generator, control panels and key operating components, then carry out servicing and testing based on the equipment and site requirements. We also provide annual service contracts for manufacturing businesses that need generator maintenance planned throughout the year.
Depending on the generator and its operating requirements, servicing can include:
- Engine oil and filter checks or replacement
- Battery and charging system checks
- Cooling system inspection
- Fuel system checks
- Alternator checks
- Control panel and alarm testing
- Voltage and frequency checks
- Generator performance testing
GCM can provide a planned maintenance programme based on the generator, how it is used and the demands of the manufacturing site. Contact us to discuss generator servicing and maintenance for your facility.
Generator Testing and Control Systems for Manufacturing Sites
GCM provides generator testing and control system services for manufacturing sites where standby power needs to perform correctly under load and integrate with the site’s electrical system.
We provide load bank testing to assess generator performance under controlled electrical loads. GCM offers both resistive and reactive load bank testing for generator sets from 20kW to 3MW, helping identify performance issues that may not be apparent during a basic no-load test.
We also design, install and maintain generator control systems for manufacturing facilities, including:
- AMF/ATS panels
- PLC-based synchronising panels
- ComAp controllers
- DEIF controllers
- DSE controllers
- Woodward controllers
Our engineers can assess the generator, controls and associated electrical equipment as one system, making sure the control arrangement is suitable for how the generator operates within the manufacturing facility.
Contact GCM to arrange generator testing or control system services for your manufacturing site.
Find & Click Where You're Located And Give Us A Call!
North East England
Yorkshire And The Humber
North West England
South East England
Greater London
North-East Scotland
Discuss Your Manufacturing Generator Requirements
Whether you need a new generator, installation for an existing project, repair of a faulty generator or a planned maintenance contract, GCM can provide support across the generator’s working life.
Contact GCM today to discuss your manufacturing facility, request a quotation or arrange generator support.