GSW1010M 1000kVA 3phase 400vac 50Hz

• Ratings definition (ISO-8528)
  ESP – Emergency Standby Power:
  It is the maximum power available during a variable electrical power sequence, under the stated operating conditions, for which a generating set is capable of delivering in the event of a utility power outage or under test conditions for up to 200 h of operation per year with the maintenance intervals and procedures being carried out as prescribed by the manufacturers. The permissible average power output over 24 h of operation shall not exceed 70 % of the ESP.
  PRP – Prime Power:
  It is defined as being the maximum power which a generating set is capable of delivering continuously whilst supplying a variable electrical load when operated for an unlimited number of hours per year under the agreed operating conditions with the maintenance intervals and procedures being carried out as prescribed by the manufacturer. The permissible average power output over 24 h of operation shall not exceed 70 % of the prime power.
  G2 class load acceptance in accordance with ISO 8528-5:2013 Higher performance classes
  check upon request.
  Gensets are compliant with EC mark which includes the following directives:
• 2006/42/CE Machinery safety. 
• 2014/30/UE Electromagnetic compatibility.
• 2014/35/UE electrical equipment designed for use within certain voltage limits
• 2000/14/EC Sound Power level. Noise emissions outdoor equipment. (amended by 2005/88/EC) – If
  applicable
• 97/68/EC Emissions of gaseous and particulate pollutants. (amended by 2002/88/EC & 2004/26/EC) –
  If applicable
• EN 12100, EN 13857, EN 60204

Company with quality certification ISO 9001

Engine specifications
Engine Brand MTU
Model 16V2000G16F
3E
PRP Rating only with supplement: DPA
Operating Speed-Nominal rpm 1500
Engine cooling system Water
[50Hz] Exhaust emission level Unregulated
Nr. of cylinder and disposition 16 V
Displacement cm³ 35700
Aspiration Turbocharged
aftercooled
Speed governor Electronic
Maximum gross power LTP ESP kW 887
Prime gross power PRP kW 806
Fan consumption kW 44
Cooling fan air flow rate m³/min 1462
Oil capacity l 114
Lube oil consumption PRP (max) % 0.35
Coolant capacity l 150
Fuel Diesel
Specific fuel consumption 75% PRP g/kWh 195
Starting system Electric
Electric circuit V 24

For additional information, please check out the PDF supplied by Pramac. GSW1010M